Giant Warrior Shoulder Plates
Consulta disponibilidad de producto
Choose options
Consulta disponibilidad de producto
Consulta disponibilidad de producto
Giant warrior with shoulder plates
DescriptionYou watch your leading officer advance through the line of your fellow soldiers. Your fate, and the fate of your entire unit, depends on this veteran's word, and you feel relieved to no longer be burdened with such a heavy burden.
“We must fight!” your officer shouts for all to hear. You adjust your Giant Warrior Shoulder Plate armor, double-checking the buckles as you listen to him continue. “For our homes and our families, we will fight until we can fight no more!” With a resounding cheer, your fellow soldiers prepare for the charge. You draw back your weapon, anxious and scared at the same time.
The battle has begun.
DETAILS
The Epic Armoury Giant Warrior Shoulder Pads are a set of two shoulder pads designed to protect the shoulder joints and upper arms. The metal plates of this armor overlap each other to provide complete laminated protection. Overlaid on the shoulder pads is a large shoulder pad, which provides additional protection to the joints and armpits. Above the shoulder pad, a vertical sword-breaker plate catches and deflects blows before they can impact the head. The sword-breaker is slightly concave and somewhat higher at the rear than at the front, providing protection without impairing vision. While the armor is designed to match the Epic Armoury "Warrior" set, it is fully interchangeable with other Epic Armory armor to completely customize your character's appearance.
Secure the Giant Warrior Shoulder Plate by tightening the top leather strap on a breastplate or neck plate, adjusting it so the armor sits comfortably over the shoulder. Prevent the armor from shifting further by securing an additional top leather strap around the upper arm. Made of 1mm thick mild steel and premium leather straps and fittings, this piece of armor is designed to withstand the abuse of a LARP or reenactment with regular care of leather and metal armor.
HISTORY
- Historically designed with sculpted ridges and overlapping plates to provide reinforced protection and deflect attacks on a chaotic battlefield
- Plate armor became more popular as firearms technology became more common. It became more prevalent during the 13th century.
Quality
- Made of 19 gauge mild steel/1mm thick
- Rolled edges with no sharp edges
- Belts and accessories made of premium leather
- Hand-welded parts for maximum durability
- Polished steel finish
This product is handmade and hand-painted and therefore unique. As a result, compared to similar items, this product may have natural deviations in pattern, color, and shape, which are not considered defects or flaws.
We produce our image material in a natural setting, where lighting and surroundings can affect colors and contrast. Therefore, the images shown may appear different from the product you receive from us.
Measurements are all in cm unless otherwise stated.
Technical details
Brand:
Epic Armory
Universe:
Sovereign
Materials:
Mild Steel - 1mm/19 Gauge
Position:
Shoulders
Product type:
Shoulder armor
Maintenance
Epic Armory Metal Works products should be treated with a quality, acid-free wax or vegetable oil and kept in a dry place. Metal armor containing leather components requires separate leather care. Read the "Leather Belts and Accessories" section below for information on cleaning and maintaining leather with leather care products.
Degrease and prepare your armor for use
When you open your armor, you may be overwhelmed by the smell of grease and oil. The oil has been applied to protect your armor during storage and transport. Use a degreasing product or mineral spirits and a dry cloth or paper towels to remove all the oil from the plate armor pieces. It's a little more difficult to remove all the oil from chain mail links, but it can be done the same way. Wipe off as much as you can with a dry cloth, and with the remaining oil, you can degrease the chain mail with mineral spirits or another solvent by spraying it on the links. You can also choose to completely submerge your chain mail in a degreasing product and use your hands to agitate the metal in the solution; this will completely remove all the oil and grease from your links. After removing the oil, be sure to dry the armor thoroughly. Bright, warm sunlight is excellent for drying your armor, but you can also use a hair dryer or heat gun to speed up the process. Be careful not to overheat any piece of leather when using a heat gun.
Cleaning
Moisture is the enemy of armor and chain mail. If your armor gets wet, it's important to dry it thoroughly as soon as possible. After handling, use, or after six months of storage or display, all metal should be wiped with a clean cloth. Lightly oil the cleaned surface with a quality, acid-free vegetable oil. Alternatively, you can apply a coat of wax to the entire surface of the exposed metal. Let the wax dry for a couple of hours, then lightly buff it with a soft cloth.
Prevention and elimination of rust
Store your armor in a dry place and check it every two months for signs of rust. If you find any, remove it by gently rubbing the affected area with a mildly abrasive pad moistened with wax or quality acid-free vegetable oil. Epic Dark products are specially treated to resist rust, but should still be treated with oil and stored in a dry place.
Leather belts and accessories
Clean them by removing dirt with a stiff brush, then gently scrub with leather soap and a clean, damp cloth until the leather appears clean. Remove the soap with a separate damp cloth to clean any soap residue, and then use a dry cloth to wipe away any remaining water from the leather.
You should always condition leather after cleaning it, as the soap will have removed some of its natural oils. Treat the leather with mink oil, olive oil, or beeswax using a clean cloth, gently rubbing a small amount of oil or wax into the leather in circles. Allow the leather to soak in the oil before wiping it with a final clean cloth to remove excess residue.
Epic Armory Metal Works products should be treated with a quality, acid-free wax or vegetable oil and kept in a dry place. Metal armor containing leather components requires separate leather care. Read the "Leather Belts and Accessories" section below for information on cleaning and maintaining leather with leather care products.
Degrease and prepare your armor for use
When you open your armor, you may be overwhelmed by the smell of grease and oil. The oil has been applied to protect your armor during storage and transport. Use a degreasing product or mineral spirits and a dry cloth or paper towels to remove all the oil from the plate armor pieces. It's a little more difficult to remove all the oil from chain mail links, but it can be done the same way. Wipe off as much as you can with a dry cloth, and with the remaining oil, you can degrease the chain mail with mineral spirits or another solvent by spraying it on the links. You can also choose to completely submerge your chain mail in a degreasing product and use your hands to agitate the metal in the solution; this will completely remove all the oil and grease from your links. After removing the oil, be sure to dry the armor thoroughly. Bright, warm sunlight is excellent for drying your armor, but you can also use a hair dryer or heat gun to speed up the process. Be careful not to overheat any piece of leather when using a heat gun.
Cleaning
Moisture is the enemy of armor and chain mail. If your armor gets wet, it's important to dry it thoroughly as soon as possible. After handling, use, or after six months of storage or display, all metal should be wiped with a clean cloth. Lightly oil the cleaned surface with a quality, acid-free vegetable oil. Alternatively, you can apply a coat of wax to the entire surface of the exposed metal. Let the wax dry for a couple of hours, then lightly buff it with a soft cloth.
Prevention and elimination of rust
Store your armor in a dry place and check it every two months for signs of rust. If you find any, remove it by gently rubbing the affected area with a mildly abrasive pad moistened with wax or quality acid-free vegetable oil. Epic Dark products are specially treated to resist rust, but should still be treated with oil and stored in a dry place.
Leather belts and accessories
Clean them by removing dirt with a stiff brush, then gently scrub with leather soap and a clean, damp cloth until the leather appears clean. Remove the soap with a separate damp cloth to clean any soap residue, and then use a dry cloth to wipe away any remaining water from the leather.
You should always condition leather after cleaning it, as the soap will have removed some of its natural oils. Treat the leather with mink oil, olive oil, or beeswax using a clean cloth, gently rubbing a small amount of oil or wax into the leather in circles. Allow the leather to soak in the oil before wiping it with a final clean cloth to remove excess residue.
At Tienda Medieval, we have thousands of functional medieval and reenactment products. Discover them.
Free shipping
The entire Iberian Peninsula from €60 (*Does not include islands) and shipping worldwide. Check our rates.
Customer service
We are available Monday through Friday to answer your questions.
Secure Payment
We comply with all regulations to ensure Secure Payment
Contact us
Need to contact us? Just email us at info@espadasymas.com